About This

• ✅ MATCH THE RESTRICTOR TO THE RATING – A thin film composite element only produces against back pressure, and that pressure comes from the drain line flow restrictor. A 50 GPD element wants roughly a 500 ml restrictor. Put it behind a restrictor sized for a different rating and you get slow production, a running drain, or no water at all. Replace the restrictor with the membrane and skip the troubleshooting.
• ✅ REMOVE TASTES & SMELLS: To remove tastes, smells, and sediment from cold water, use this compatible with most Reverse Osmosis water filter Systems. This is the membrane that comes standard with all taste & odor filter systems. The activated carbon diamond-wound polypropylene membrane fits all Standard Membrane Housings.
• ✅EFFICIENCY: Our water filter membrane eliminates pollutants and impurities from water. At the same time, it effectively preserves many vital minerals. For optimal performance, water filter membranes should be replaced every 12 to 24 months based on the quality of your water.
• ✅FEATURES: Our water filter membrane particularly offers a larger surface area and a longer life. This membrane eliminates chlorine, bad taste, and odor, and is available in a variety of sizes. This replacement membrane will provide you with high filtering performance at a lower cost.
• ✅PURER WATER FROM EVERY SOURCE – On municipal tap or private well supply, the membrane strips dissolved solids — low-TDS water for drinking and cooking from the system you already own. RO reduces TDS broadly; for certified reduction of specific contaminants, look for systems tested to NSF/ANSI 58 for those claims.
• FITS THESE PART NUMBERS – Direct replacement for TW30-1812-50, TW30-1812-50HR, W-1812-50, TFM-50, TLC-50-M, TE-1812, TW-1812-50D, RE1812-50, 80722 and 92035. The element seals in the nominal 2 inch inside diameter vessels used across residential four and five stage systems, so if the membrane you are pulling out is a 50 GPD 1812, this one drops into the same housing.
• MATCH THE FILTER TO YOUR WATER – Cartridges are maintenance parts, not water treatment plans, and no single one handles everything. Carbon reduces chlorine taste and odor. Sediment media captures sand, silt, dirt and rust. For any specific contaminant you are concerned about, look for a system certified to the NSF/ANSI standard that names it. If you are on a private well, start with a water test.

Overview

• Material : Polypropylene (PP)
• Product Dimensions : 1.75"D x 1.75"W x 11.75"H
• Item Weight : 8 ounces
• Product Benefits : Removes chlorine, bad taste, and odor, and eliminates pollutants and impurities while preserving vital minerals and offering longer filter life Removes chlorine, bad taste, and odor, and eliminates pollutants and impurities while preserving vital minerals and offering longer filter life
• Brand : CFS