About This

• ✅ HIGH OUTPUT NEEDS THE RIGHT RESTRICTOR – A thin film composite element only produces against back pressure, and that pressure comes from the drain line flow restrictor. A 150 GPD element needs a much larger restrictor than a 50 or 75 GPD system ships with. Install it behind the old restrictor and you get a running drain and slow output. Swap the restrictor with the membrane and the system behaves as rated.
• ✅ PURER WATER FROM EVERY SOURCE – On municipal tap or private well supply, the membrane strips dissolved solids — low-TDS water for drinking and cooking from the system you already own. RO reduces TDS broadly; for certified reduction of specific contaminants, look for systems tested to NSF/ANSI 58 for those claims.
• ✅EFFICIENCY: Our water filter membrane eliminates pollutants and impurities from water. At the same time, it effectively preserves many vital minerals. For optimal performance, water filter membranes should be replaced every 12 to 24 months based on the quality of your water.
• ✅FITS THESE PART NUMBERS – Direct replacement for TW30-1812-50, TW30-1812-50HR, W-1812-50, TFM-50, TLC-50-M, TE-1812, TW-1812-50D, RE1812-50, 80722 and 92035. The element seals in the nominal 2 inch inside diameter vessels used across residential four and five stage systems, so if the membrane you are pulling out is a 50 GPD 1812, this one drops into the same housing.
• ✅MATCH THE FILTER TO YOUR WATER – Cartridges are maintenance parts, not water treatment plans, and no single one handles everything. Carbon reduces chlorine taste and odor. Sediment media captures sand, silt, dirt and rust. For any specific contaminant you are concerned about, look for a system certified to the NSF/ANSI standard that names it. If you are on a private well, start with a water test.
• BULLET 3 (314) — your membrane variant, verbatim PURER WATER FROM EVERY SOURCE – On municipal tap or private well supply, the membrane strips dissolved solids — low-TDS water for drinking and cooking from the system you already own. RO reduces TDS broadly; for certified reduction of specific contaminants, look for systems tested to NSF/ANSI 58 for those claims.

Overview

• Material : Polypropylene (PP)
• Product Dimensions : 1.75"D x 1.75"W x 11.75"H
• Item Weight : 16 ounces
• Product Benefits : Removes chlorine, bad taste, and odor, and eliminates pollutants and impurities for cleaner, better-tasting water. Removes chlorine, bad taste, and odor, and eliminates pollutants and impurities for cleaner, better-tasting water.
• Brand : CFS